304 stainless steel kitchen sink purchase instructions
When purchasing a 304 stainless steel kitchen sink, the depth should be considered first. Some imported 304 stainless steel kitchen sinks are not suitable for large domestic pots, and the second is the size. Whether there are moisture-proof measures at the bottom is also not to be missed, and pay attention to the following points.
①Determine the size of the 304 stainless steel kitchen sink according to the size of the cabinet countertop, because the 304 stainless steel kitchen sink can be installed on the table, in the middle of the table, and under the table, so the selected size is also different.
② When choosing stainless steel 304 stainless steel kitchen sink, the thickness of the material should be moderate, too thin will affect the service life and strength of 304 stainless steel kitchen sink, and too thick will easily damage the washed tableware. In addition, it depends on the flatness of the stainless steel surface. If it is uneven, it means that the quality is poor.
③Usually, the 304 stainless steel kitchen sink with a large cleaning volume has good practicability, and the depth is about 20 cm, which can properly prevent water splashing.
④The surface treatment of 304 stainless steel kitchen sink is matte surface, which is beautiful and practical. The welding part of 304 stainless steel kitchen sink should be carefully observed. The weld seam must be smooth and even without rust.
⑤It has beautiful appearance and reasonable design, and it is better to have a water overflow.
Possess many high-end stainless steel sinks with fashionable design, beautiful and practical, and fine workmanship