NEWS
Installation tips for kitchen sink 304 stainless steel
The thickness of the kitchen sink 304 stainless steel is about 0.8-1.0mm. If it is a manual stainless steel sink, the thickness for exporting abroad will be between 1.2-1.5, while the domestic panel will be made of stainless steel with a thickness of 3-4mm. The inner tank is still 0.8mm-1.0mm
The thickness of the kitchen sink 304 stainless steel is substantially about 0.8-1.0 mm. If it is a manual stainless steel sink, the thickness of the stainless steel sink exported abroad will be between 1.2-1.5. Home manual sinks usually opt for panels. The thickness of the stainless steel plate is 3-4mm, and the inner tank is still 0.8mm-1.0mm.
Domestic handmade kitchen sink 304 stainless steel. This requires us to use our eyes to distinguish carefully. For domestic products, some international first-line brands also continue the standard thickness of 1.2mm. For example, a certain Sgroja, a certain Lanka and so on. The material is also the Pohang sheet, because the rich and powerful, the material has not lowered the standard at all, and it is not necessary. Because wool is plucked from sheep.
The thickness of 90% hand outlet kitchen sink 304 stainless steel is 1.2mm. Some are 1.0mm thick, while 1.5mm is a fraction. Note that the thickness is the thickness of the entire sink, ie the thickness of any part of the sink is this thickness. 1.2mm is the standard thickness of international products, neither thick nor thin. Too thick will lose the flexibility of stainless steel, while too thin will shorten the life of the product and increase the corresponding problems.
Related News
Possess many high-end stainless steel sinks with fashionable design, beautiful and practical, and fine workmanship
Message
0750-8308638
vivian_shunhe@sunhere.cn
Message
Copyright 2021 HESHAN SHUNHE METAL PRODUCT CO.,LTD 粤ICP备16010972号-1 Powered by:300.cn